Fli
12-10-2019, 03:45 PM
When i turned DrayTek Vigor 2925 on and connected it to the WAN uplink and LAN cable to the computer, accessed http://192.168.1.1/ entered login "admin" password "admin" i seen german language.
WAN port looked unused and there was no internet connectivity. Here is what helped:
I have used my old router to download new firmware from https://www.draytek.co.uk/support/downloads/vigor-2925
and extracted the .zip archive. Went again to Vigor2925 web interface Systemmanagement > Firmware aktualisieren >
Selected firmware file from extracted archive with extension .all (this one will overwrite all settings and configuraton presently on the router)
After router restart everything is in english 👍. So i go to WAN > Internet Access > and set WAN "Access mode" as "Static or Dynamic IP". Then "Details page" > Static or Dynamic IP > tick to "enable" and tick "Obtain an IP address automatically". Internet started working when the router booted up.
WAN port looked unused and there was no internet connectivity. Here is what helped:
I have used my old router to download new firmware from https://www.draytek.co.uk/support/downloads/vigor-2925
and extracted the .zip archive. Went again to Vigor2925 web interface Systemmanagement > Firmware aktualisieren >
Selected firmware file from extracted archive with extension .all (this one will overwrite all settings and configuraton presently on the router)
After router restart everything is in english 👍. So i go to WAN > Internet Access > and set WAN "Access mode" as "Static or Dynamic IP". Then "Details page" > Static or Dynamic IP > tick to "enable" and tick "Obtain an IP address automatically". Internet started working when the router booted up.